4.9 Stars on 250+ Reviews
Foam Engineers worked with the architect and general contractor to determine the best way to insulate these apartments in University City, Missouri (U City MO) using a combination of closed cell spray foam insulation; blown in fiberglass; and fiberglass batt insulation. This one apartment unit took about 6 days to complete. Spray foam was chosen for it’s moisture resistance…
A Perfect Application for Closed Cell Spray Foam Insulation Foam Engineers applies the best insulation materials and installed closed cell spray foam for this job in Maplewood MO. Check out this video and then read about the project and see the pictures below. We install spray foam insulation in many renovation jobs all over the…
Spray Foam On Attic Drywall: Not everyone knows that we can apply spray foam in an attic. The picture below was taken in the attic of a home in Town & Country MO. We applied spray foam on top of the drywall. If you look closely to the left of the picture you will see…
This beautiful home in a wooded area of Union MO received a home addition – but this addition went straight up! A 2nd floor was added above the basement and 1st floor and it was done in a way to be energy efficient and comfortable. Foam Engineers applied 4.5 to 5.5 inches of open cell spray foam insulation in the 2x6walls;…
[evideo][/evideo]This is a project recently completed in Hermann Missouri. The building is the Peoples Bank of Hermann Tech Center and spray foam insulation was specified by the architect. The walls were foamed to insulate and air seal. The underside of the roof sheathing was foamed to enclose the HVAC ducting in conditioned space. This is…
This is a project we are working on now (March 2014). The building was originally a school and is now being remodeled into a house. This living room is under a flat roof. Working with the owner we decided upon an energy efficient roof system: R20 open-cell spray foam under the roof deck; R10 ISO…
This home in Owensville just got an energy efficiency upgrade. The owner furred out the masonry walls with 2×4’s leaving a 2″ gap. We sprayed foam to the block walls and continued the spray foam insulation and air barrier right up to the underside of the flat roof deck. A properly designed and installed insulation system makes the home more durable, saves…
Finally… warmer weather and our guys can go out and spray foam insulation in above freezing temperatures! Here David sprays foam to create a perfect insulation job around wiring. Does spray foam harm the wiring? Absolutely not! We just ask that the wiring is properly secured in the wall to keep the expanding foam from pushing it…
